|Axis Customer Forum
|Page 1 of 1|
|Author:||Dee Edison 823145 [ Mon Nov 05, 2018 5:57 pm ]|
I am trying to record an AXIS P5635 on a 3rd party NVR made by Northern. Both are Onvif compliant but I keep getting a bandwidth error on the NVR.
I have set up an Onvif profile on the camera but there is not allot in the manual about this.
Any help would be appreciated.
|Author:||Dee Edison 823145 [ Tue Nov 06, 2018 3:29 pm ]|
|Post subject:||Re: ONVIF|
Axis tech Support helped me out on this and for anyone who is interested here it is, it was simple and worked..
The issue is that our newer cameras have a higher default bandwidth than the NVR will allow for a single camera
To adjust this, log into the camera and go to
b. ONVIF Media profiles
c. Select the profile_1 h264 profile.
d. Select the Video Encoder Configuration (+)
e. Select "Edit Configuration"
f. Change the "Bitrate (kbit/s)" value to 8000
Note: A value of 8000 to 12000 should work.
g. Select "Save Configuration"
h. Select 'OK"
h. Select "Save Profile"
This is similar to what I thought however the bitrate of the ONVIF stream has to be changed.. I was not changing the correct stream.
|Page 1 of 1||All times are UTC|
|Powered by phpBB® Forum Software © phpBB Group