Axis Customer Forum

It is currently Sun Nov 18, 2018 2:25 am

All times are UTC




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: ONVIF
PostPosted: Mon Nov 05, 2018 5:57 pm 

Joined: Wed Jun 14, 2017 12:28 pm
Posts: 2
I am trying to record an AXIS P5635 on a 3rd party NVR made by Northern. Both are Onvif compliant but I keep getting a bandwidth error on the NVR.
I have set up an Onvif profile on the camera but there is not allot in the manual about this.
Any help would be appreciated.


Top
 Profile  
 
 Post subject: Re: ONVIF
PostPosted: Tue Nov 06, 2018 3:29 pm 

Joined: Wed Jun 14, 2017 12:28 pm
Posts: 2
Axis tech Support helped me out on this and for anyone who is interested here it is, it was simple and worked..

The issue is that our newer cameras have a higher default bandwidth than the NVR will allow for a single camera
To adjust this, log into the camera and go to
a. ONVIF
b. ONVIF Media profiles
c. Select the profile_1 h264 profile.
d. Select the Video Encoder Configuration (+)
e. Select "Edit Configuration"
f. Change the "Bitrate (kbit/s)" value to 8000
Note: A value of 8000 to 12000 should work.
g. Select "Save Configuration"
h. Select 'OK"
h. Select "Save Profile"


This is similar to what I thought however the bitrate of the ONVIF stream has to be changed.. I was not changing the correct stream.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Group