Joined: Mon Jan 28, 2019 11:50 pm Posts: 1
|
Hi im having an issues with the Axis 5.03.002 device management software. It will discover all factory default axis ip addresses but when I change the ip and remove it from the axis device managerment and try to discover it using "add devices" it will not discover it anymore unless I use the " add devices from ip range"
My problem is what if I don't know the ip range and what to discover if I have axis cameras in the network.
The old axis management does discover everthying on the network thru mac address.
Please advise.
|
|