Axis Customer Forum
https://custforum.axis.com/

Axis P5522-E Does not power up
https://custforum.axis.com/viewtopic.php?f=4&t=6325
Page 1 of 1

Author:  Jack Reilly [ Thu Feb 28, 2019 8:32 pm ]
Post subject:  Axis P5522-E Does not power up

I have been trying to get an Axis P5522-E camera to work, but I can't get it to power up, the LED doesn't light up. The Axis T8123 Midspan works because I moved to an operational camera and it worked with it. The Port light on the midspan is slow blinking indicating an over current or short circuit on the port when I have it connected to the non working camera. I have two other cameras within a 3- 6 month time frame that started doing this same thing. It is difficult for me to believe that I have three camera's that have failed when they are in different parts of my state. There is something that i am missing. If any one has any ideas it would be greatly appreciated.

Author:  Cheng Xin 345535 [ Fri Mar 01, 2019 7:00 am ]
Post subject:  Re: Axis P5522-E Does not power up

Your POE Mode B circuitry in your P5522-E May be damaged by surge. Try using a POE switch to power up the unit, it may work as POE switch used the POE mode A circuitry on the P5522-E.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/