Axis Customer Forum

It is currently Fri Aug 23, 2019 10:16 pm

All times are UTC

Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Fri May 11, 2018 3:55 pm 

Joined: Wed Feb 01, 2017 4:11 pm
Posts: 30
I've got a site that has 2 4 channel encoders on SD cards. I'm using cheapo-sandisk SD cards and they are having issues. Support says they are the reason the encoders stop working and require a reboot.

So, looking for a replacement. Obvious solution is axis branded sd cards, but these are very expensive and by the time I've put 2 cards in these encoders I'm half way to a companion recorder.

So, the real question here is:

Axis 4 channel recorder has 4 PoE outputs and is for 4 1080p companion cameras.

Can I run these two M7014 encoders on the 4 channel recorder? The overall throughput on the M7014 is basically less than a 1080p stream from a companion camera. Ideally, I would have these 2 encoders and then 2 additional companion cameras on a recorder. That would be a total of 10 'channels' but actually less than 4 channels of 1080p...


PostPosted: Mon May 14, 2018 1:28 am 

Joined: Fri Nov 14, 2014 1:38 am
Posts: 740
Yes. It will most likely works.

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Group