Axis Customer Forum
https://custforum.axis.com/

P1428-E After firmware update no zoom setting possible
https://custforum.axis.com/viewtopic.php?f=2&t=6078
Page 1 of 1

Author:  Alfred Ortner [ Fri Nov 30, 2018 7:46 pm ]
Post subject:  P1428-E After firmware update no zoom setting possible

Hello
I have a problem with an Axis 1428-E camera
After the firmware update from 5.55 to 6.5, the zoom function does not work anymore.
There is an error message:
"There was an error on a request. Error response: The server encountered an error and could not complete your request".

If I reset the firmware back to 5.55, the zoom function Wider works. A reset to factory settings and an update using FTP I have tried several times.

I speak German and use Google for translation.

Please help

Server Report
[ ERR ] focusd[1227]: file '/var/lib/focusd/focusd.state' uid=0 gid=0 mode=00008180
[ ERR ] focusd[1227]: could not create IO channel for '/var/lib/focusd/focusd.state': Permission denied
[ ERR ] focusd[1227]: file '/var/lib/focusd/focusd.state' could not be opened/used
[ ERR ] systemd[1]: Failed to start Focus daemon.
[ WARNING ] systemd[1]: focusd.service: Failed with result 'exit-code'.
[ ERR ] systemd[1]: Failed to start Focus daemon starter.
[ WARNING ] systemd[1]: focusd-starter.service: Failed with result 'exit-code'.
[ ERR ] focusd[1343]: could not create IO channel for '/var/lib/focusd/focusd.state': Permission den
[ ERR ] focusd[1343]: file '/var/lib/focusd/focusd.state' could not be opened/used
[ ERR ] focusd[1343]: file '/var/lib/focusd/focusd.state' uid=0 gid=0 mode=00008180
[ ERR ] systemd[1]: Failed to start Focus daemon.
[ WARNING ] systemd[1]: focusd.service: Failed with result 'exit-code'.
[ ERR ] focusd[1410]: file '/var/lib/focusd/focusd.state' uid=0 gid=0 mode=00008180
[ ERR ] focusd[1410]: could not create IO channel for '/var/lib/focusd/focusd.state': Permission denied
[ ERR ] focusd[1410]: file '/var/lib/focusd/focusd.state' could not be opened/used
[ ERR ] systemd[1]: Failed to start Focus daemon.
[ WARNING ] systemd[1]: focusd.service: Failed with result 'exit-code'.
[ ERR ] focusd[1439]: could not create IO channel for '/var/lib/focusd/focusd.state': Permission denied
[ ERR ] focusd[1439]: file '/var/lib/focusd/focusd.state' uid=0 gid=0 mode=00008180
[ ERR ] focusd[1439]: file '/var/lib/focusd/focusd.state' could not be opened/used
[ ERR ] systemd[1]: Failed to start Focus daemon.
[ WARNING ] systemd[1]: focusd.service: Failed with result 'exit-code'.
[ ERR ] focusd[1488]: file '/var/lib/focusd/focusd.state' uid=0 gid=0 mode=0000818
[ ERR ] focusd[1488]: could not create IO channel for '/var/lib/focusd/focusd.state': Permission denied
[ ERR ] focusd[1488]: file '/var/lib/focusd/focusd.state' could not be opened/used
[ ERR ] systemd[1]: Failed to start Focus daemon.
[ WARNING ] systemd[1]: focusd.service: Failed with result 'exit-code'.
[ WARNING ] systemd[1]: focusd.service: Start request repeated too quickly.
[ ERR ] systemd[1]: Failed to start Focus daemon.
[ WARNING ] systemd[1]: focusd.service: Failed with result 'start-limit'.
[ WARNING ] mergeresolv.sh[2214]: nothing to merge falling back to backup plan!
[ WARNING ] wsdd[1245]: Failed to send IPv4 Hello: SOAP 1.2 fault: SOAP-ENV:Sender [no subcode]#012"End of file or no input: Invalid argument"#012Detail: [no detail]
[ WARNING ] udhcpc[743]: /usr/share/udhcpc/default.script[2431]: waited 0s on /var/lock/init.d/udhcpc.eth0.lock (net[2181])
[ WARNING ] udhcpc[743]: /usr/share/udhcpc/default.script[2431]: waited 1s on /var/lock/init.d/udhcpc.eth0.lock (net[2181])
[ WARNING ] systemd[1]: dhcp4@eth0.service: State 'stop-sigterm' timed out. Killing.
[ NOTICE ] systemd[1]: dhcp4@eth0.service: Unit entered failed state.
[ WARNING ] systemd[1]: dhcp4@eth0.service: Failed with result 'signal'.
[ INFO ] systemd[1]: Stopping httpd (Apache)...
[ INFO ] net[2181]: DHCPv4 client on eth0 stopped

Author:  Cheng Xin 345535 [ Tue Dec 11, 2018 9:14 am ]
Post subject:  Re: P1428-E After firmware update no zoom setting possible

Try to update to the latest firmware, Axis should have fixed the issue by now, though I cannot find any zoom or focus issue fix.
https://www.axis.com/ftp/pub_soft/MPQT/ ... 6_50_3.bin

If it still did not fix it, you need to report the bug to Axis support as the P1428-E runs on Ambarella and not Axis ARTPEC. So it may not be discovered.

If you are interested in further discussion, please contact me via Skype @ Cheng.Xin.SG

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/