Axis Customer Forum
https://custforum.axis.com/

Axis Q1765-LE Auto Focus Range
https://custforum.axis.com/viewtopic.php?f=2&t=5847
Page 1 of 1

Author:  Thomas Hartwig 194301 [ Wed Oct 10, 2018 7:53 am ]
Post subject:  Axis Q1765-LE Auto Focus Range

Is it possible to set the Auto Focus to a specific range in which the focus is adjusted? Like between 30% and 60%?
Is it possible to save the Auto Focus window permanently or is it only in the user interface?

Author:  Brendan Zoglman 113364 [ Wed Oct 10, 2018 5:52 pm ]
Post subject:  Re: Axis Q1765-LE Auto Focus Range

You can save a focus point as a preset and then send the camera to the preset on an event. One example is using that camera for LPC where you want one focal point for day and one for night for better capture. You can set a reoccurance as well in case someone changes the zoom during use.

Author:  Peter Headley [ Mon Jan 21, 2019 6:34 pm ]
Post subject:  Re: Axis Q1765-LE Auto Focus Range

Brendan Zoglman 113364 wrote:
You can save a focus point as a preset and then send the camera to the preset on an event. One example is using that camera for LPC where you want one focal point for day and one for night for better capture. You can set a reoccurance as well in case someone changes the zoom during use.


Could you explain how this is done? Thank you!

Author:  Brendan Zoglman 113364 [ Tue Jan 22, 2019 10:07 pm ]
Post subject:  Re: Axis Q1765-LE Auto Focus Range

Peter Headley wrote:
Brendan Zoglman 113364 wrote:
You can save a focus point as a preset and then send the camera to the preset on an event. One example is using that camera for LPC where you want one focal point for day and one for night for better capture. You can set a reoccurance as well in case someone changes the zoom during use.


Could you explain how this is done? Thank you!


Here is a video that goes through LPR setup and in that is how to setup what you are looking for.

https://youtu.be/FC-LAKpS_DU

Author:  Peter Headley [ Wed Jan 23, 2019 2:49 pm ]
Post subject:  Re: Axis Q1765-LE Auto Focus Range

Brendan Zoglman 113364 wrote:
Peter Headley wrote:
Brendan Zoglman 113364 wrote:
You can save a focus point as a preset and then send the camera to the preset on an event. One example is using that camera for LPC where you want one focal point for day and one for night for better capture. You can set a reoccurance as well in case someone changes the zoom during use.


Could you explain how this is done? Thank you!


Here is a video that goes through LPR setup and in that is how to setup what you are looking for.

https://youtu.be/FC-LAKpS_DU


Thank you!!! I ran thru it once and will program it as described. Thank you!!!

Author:  Peter Headley [ Sun Jan 27, 2019 5:43 pm ]
Post subject:  Re: Axis Q1765-LE Auto Focus Range

Brendan Zoglman 113364 wrote:
Peter Headley wrote:
Brendan Zoglman 113364 wrote:
You can save a focus point as a preset and then send the camera to the preset on an event. One example is using that camera for LPC where you want one focal point for day and one for night for better capture. You can set a reoccurance as well in case someone changes the zoom during use.


Could you explain how this is done? Thank you!


Here is a video that goes through LPR setup and in that is how to setup what you are looking for.

https://youtu.be/FC-LAKpS_DU



That worked perfect, thank you again!!!

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/