Axis Customer Forum

It is currently Sun Jan 21, 2018 3:01 am

All times are UTC




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Pendant Mount Gasket
PostPosted: Sat Dec 30, 2017 6:19 pm 

Joined: Sat Dec 30, 2017 6:05 pm
Posts: 3
Is there a gasket kit for the pendant mount kit T94T01D when used with the P3225LVE MkII camera? There is a significant (0.8mm) gap when the kit is installed and I am concerned about water intrusion since this is meant for an outdoor application. Even with the hood over top it looks like the vent holes would allow water to flow on to the top of the camera mount and then in through the gap.

If there is no gasket kit, would it be ok to use some sort of caulking?


Top
 Profile  
 
 Post subject: Re: Pendant Mount Gasket
PostPosted: Tue Jan 02, 2018 3:42 am 

Joined: Fri Nov 14, 2014 1:38 am
Posts: 555
No additional gasket will be needed if T94T01D is fitted properly to the P3225-LVE.

You can confirm this with Axis Support.

Axis Accessory selector will let you know what are all the accessories needed.

https://www.axis.com/sk/en/products/acc ... selector#/

If you are interested in further discussion, please contact me via Skype @ Cheng.Xin.SG


Top
 Profile  
 
 Post subject: Re: Pendant Mount Gasket
PostPosted: Thu Jan 04, 2018 2:26 am 

Joined: Sat Dec 30, 2017 6:05 pm
Posts: 3
Thanks very much for the response. I am a bit concerned then that the camera is not fitted correctly because there is a visible gap between the camera and the mount where I would expect it to be flush. It is, as far as I can see, correctly aligned and torqued so I am curious about the gap. I have to open another set to fit the kits together and I will take a photo and include it here. Perhaps it is as expected.


Top
 Profile  
 
 Post subject: Re: Pendant Mount Gasket
PostPosted: Fri Jan 05, 2018 8:33 am 

Joined: Fri Nov 14, 2014 1:38 am
Posts: 555
Yes a photo will be helpful


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Group